Module FT232, FT232 USB to serial, USB to TTL FT232RL communication module, Brush board

Module FT232, FT232 USB to serial, USB to TTL FT232RL communication module, Brush board

View More

11,59

In stock (can be backordered)

QuantitàPrezzo Unitario
12 - 49 10,43
50 - 99 9,27
100 + 8,11

Product Description

Module FT232, FT232 USB to serial, USB to TTL FT232RL communication module, Brush board

 

The FT232 module FT232 USB to serial USB to TTL FT232R FT232RL Product Description Features: USB to serial Maximum features: The supply mode supports three kinds: 5V external power supply; 3.3V external power supply; requirements 3.3V-5V external power supply () Comes with three LEDs: TXD LED; RXD LED; The POWER LED on; Typical applications: MCU to communicate with the PC (the UART protocol software, hardware-based USB interface) Main resources: The FT232 USB type A interface, UART interface, power supply mode selection interface Description: (where to access MCU, for example, PIN how connected) ? VCC: then 3.3V-5V (powered by the user board) or vacant (module for the user board for 5V, the VCCIO jump to 5V; the module is a user board for 3.3V, the VCCIO jump 3.3V) ? GND: Connect to GND ? TXD: then MCU.RX (signal flow: MCU.RX << FT232 << PC.TX) ? RXD: then MCU.TX (signal flow: MCU.TX >> FT232 >> PC.RX) ? RTS #: MCU.CTS (in signal flow: MCU.CTS << The FT232 << PC.RTS) ? CTS #: the pick MCU.RTS (signal flow: MCU.RTS >> The FT232 >> PC.CTS) Note: ? support windows8. ? TXD, RXD, RTS #, CTS #: bent pin leads. ? rest PIN: not welded pin row seat, but the distribution of pin row seat, customizable by the user, interpolation or the docked user system. Configuration Checklist 1.FT232 USB UART Board (type A) × 1 2.40PIN row needle + 40PIN row × 1

Facebooktwitterredditpinterestlinkedinmail

There are no reviews yet.

Be the first to review “Module FT232, FT232 USB to serial, USB to TTL FT232RL communication module, Brush board”