Currently Empty: €0,00
-€1,71
Isolated Switching Power Supply Module DC 12V 450mA
€4,51
Attualmente disponibile su ordinazione con consegna prevista entro 60 giorni circa dall'acquisto.
| Quantità | Prezzo Unitario |
|---|---|
| 12 - 49 | €4,06 |
| 50 - 99 | €3,61 |
| 100 + | €3,16 |
Product Description
Isolated Switching Power Supply Module DC 12V 450mA
The power supply is isolated industrial power modules, with a temperature protection, overcurrent and short circuit full protection, high voltage isolation, AC85V-265V wide voltage input, AC and DC, 431 precisely regulated DC12V output, ultra-small size, high reliability, cost performance characteristics.
Input voltage AC 85 ~ 265v 50/60HZ or DC100V-370V
Output voltage DC12V (± 0.1V)
Output current 450mA
Power 5W
Project | Unit | Min | Typical values | Max | Test Conditions |
Operating Temperature | °C | -20 |
| 60 |
|
Relative Humidity | %RH | 40 |
| 90 | No cooling |
2 Technical requirements
2.1 Input Characteristics
2.1 Input Characteristics
Project | Unit | Min | Typical values | Max | Test Conditions |
Input Voltage Range | V ac | 85 | 110/220 | 265 | Under full load condition |
Input Current | A | 0.0273(AC110V) 0.014(AC220V) | Under full load condition | ||
Input surge current | A | 20 | Under full load condition | ||
2.2 Output characteristics
2.2.1 Output regulation characteristics
2.2.1 Output regulation characteristics
output voltage | Minimum current | Maximum current | Peak current | output voltage range | Ripple | |
+12V | 0A | 500mA | 600mA | 11.80~12.1V |
|
2.2.2 Other output characteristics
Project | Unit | Min | Typical values | Max | Test Conditions |
Output Power | W | 0 | 5.3 | 6.00 | DC output power |
Output efficiency | % |
| 80 |
| Rated load |
Overshoot switch | % |
|
| 10 |
|
Output rise time | mS |
|
| 100 |
|
2.3 Protection
Project | Unit | Yes / No | Min | Typical values | Max | Recovery characteristics |
Power output over |
| Yes |
|
|
| Lock, after re-starting recovery |
Short circuit protection |
| Yes |
|
|
| Automatic recovery after the fault is removed |
Temperature protection |
| Yes |
|
|
| Lock, after re-starting recovery |
Overcurrent |
| Yes |
|
|
| Lock, after re-starting recovery |
3 Dimensions
Dimensions: LWH 3 * 2 * 1.8 (cm)
Dimensions: LWH 3 * 2 * 1.8 (cm)
Abbiamo disponibili datasheet di tutti i componenti, qualora non fosse presente nella scheda download del prodotto inviaci un messaggio dal modulo contattaci e lo pubblicheremo il prima possibile nel nostro sito.
Be the first to review “Isolated Switching Power Supply Module DC 12V 450mA”
You must be logged in to post a review.
There are no reviews yet.